Tag Archives: wallpaper pva glue

China Home Decoration PVA Wallpaper Glue Powder Low Price and Good Quality wallpaper edge glue

Product Description

PVA Powder

Polyvinyl alcohol is high polymer with excellent characters to dissolve easily in water but not to dissolve in common organic
solvent and organic acids, and with excellent film-forming property,oil resistant, chemical-resistant. It can react with formaldehydes to form polyvinyl acetal.
The PVA production facilities of our company have been perfecting day by day with the long-term absorption and technological
transformation on the basis of importing the complete set of technology from European Company. PVA produced by our company is good in performances and stable in quality. It enjoys a great reputation both at home and abroad.

 

Product Name

PVA 2488

Hydrolysis%(mol/mol)

87.0-89.0

Viscosity mpa.s

44.0-55.0

Volatile(%)

≤5.0

Purity(%)

≥93.5

Ash content(%)

≤0.5

PH

5~7

 

Application

 

1.In the textile industry , they are mainly used as yarn pulp, fabric finishing agents, and raw materials of vi-nylon fibers;
2. In the construction and decoration industries, they can be used as mortar cement additives, paint additives for interior and exterior walls, and molding plate adhesives;
3. In the chemical industry, they can be used as polymerization emulsifiers, dispersants, and raw materials for the production of PVF, acetal and butyral resins;
4. In lumbering and paper-making industries, they can be used as adhesives;
5. In agriculture, they can be used as soil improvers, pesticide adhesion synergist and PVA film;
6. In petroleum exploitation, they can be used as well-cementing agents.
7.In addition, they can also be used in cosmetics, pharmaceuticals, printing, ceramics, steel, electronics, electroplating, and so on.

Features:

Easy in application;

Solidifying at room temperature;

High adhesion force;

Transparent formed adhesion film;

No pollution to the materials;

Non-poisonous and nodanger of fire hazard and explosion;

No environmental pollution.

 

Technical Index:

Appearance White Paste
Viscosity (20 °C) 10000-13000 mPa.s
Solids Content approximately 40%
Shear Strength ≥10 mpa
Specific Gravity 0.95-1kg/L
PH 6-7
Shelf Life 12 months

 

Storage Condition:

The product should be kept in a dry and cool storehouse in which the temperature is 10°C-30°C. The storage period is 6 months. If the product exceeds the storage period but is still up to standard through inspecting, the product may be used.

 

Good Reminds:

 

1. The ambient temperature must be more than 10°C in using. The white glue is only used for adhesion of porous materials.

2. According to different requirement, the white glue can be diluted with water. The method is that the white glue must be heated to 30°C~40°C, and then put water of 30°C~40°C into white glue slowly and stir it uniformly. The cold water of below 10°C may not be used for diluting the white glue.

 

3. After using, the container of white glue should be covered tightly. In order to avoid skin formation on the white glue, put some water on the white glue, which should be stirred uniformly when using.

4. The white glue cannot be used for bonding the metal.

 

5. The environment should have good ventilation.

 

Our Services
 

Why Choose us?

1.One of the top 5 Chemical Company in China.

2.Rich experience in Transport of Chemical liquid goods.

3.Response timely with professional workable advise.

4.Wide range of chemical product provided,your best one-step purchase choice.

5.Site Instruction by engineer.

6.OEM Service Provided.

7.Free Sample For Test.

Company Profile
 

HangZhou CZPT Building Materials Co.,Ltd local at HangZhou City,ZheJiang Province,China.

Professional in producing the HPMC,HEMC and RDP that using for the line of construction,Industry and Chemical. CZPT company is a research and development production and marketing into a business with a number of highly qualified technical, rich superb technical personnel to advanced management and unique technology.We provide the construction additives with the best price and service to our customers, such as Re-dispersible emulsion powder,Hydroxypropyl Methyl Cellulose. We can meet different type of products according to our customer requirements.CZPT serve customers around the world.

 

FAQ

 

Q1: Are you manufacturer or trader?
A:Dear customers, please rest assured that we are a professional manufacturer of HPMC and RDP, and you can buy assured products.

 

Q2: what is your terms of payment?
A: We can accept LC, TT.

 

Q3: What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

 

Q4: How about your delivery time?

A: We can deliver the goods the next day at the soonest, and the latest will not be more than 9 days.Such a fast delivery time depends on our strong production capacity, which is not affected by the environmental protection and the shutdown, so if you want to find a stable supply of goods to choose us is your right choice!
 

Q5: Can you produce according to the samples?
A: Yes, you can send your sample to me. After my test, I will make it customized according to your sample to ensure that all the indicators meet the requirements of your sample.

 

Q6: Can you provide samples for free?
A: The confirmation of samples is a necessary part of our cooperation, so I really welcome you to ask for samples for us. We can provide samples to customers for free.

 

Q7: Do you test all your goods before delivery?
A: Yes, we will carefully test the
products before delivery, and we will also test the products for application test. It is our advantage to test the products for
application test before delivery, which ensures that the products delivered are 100% qualified.

 

Q8: How do you make our business long-term and good relationship?

A1. We keep good quality and comopetitive price to ensure our customers benefit;

A2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from

Welcome to inquiry us, Thank you!

US $1.77
/ kg
|
500 kg

(Min. Order)

###

After-sales Service: 24h Services
Type: Viscosity Reducer Admixture
Name: Polivinyl Alcohol
Other Name: PVA
Packing: 25kg
Main Raw Material: Vae/VAC

###

Samples:
US$ 0/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

Product Name
PVA 2488
Hydrolysis%(mol/mol)
87.0-89.0
Viscosity mpa.s
44.0-55.0
Volatile(%)
≤5.0
Purity(%)
≥93.5
Ash content(%)
≤0.5
PH
5~7

###

Appearance White Paste
Viscosity (20 °C) 10000-13000 mPa.s
Solids Content approximately 40%
Shear Strength ≥10 mpa
Specific Gravity 0.95-1kg/L
PH 6-7
Shelf Life 12 months
US $1.77
/ kg
|
500 kg

(Min. Order)

###

After-sales Service: 24h Services
Type: Viscosity Reducer Admixture
Name: Polivinyl Alcohol
Other Name: PVA
Packing: 25kg
Main Raw Material: Vae/VAC

###

Samples:
US$ 0/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

Product Name
PVA 2488
Hydrolysis%(mol/mol)
87.0-89.0
Viscosity mpa.s
44.0-55.0
Volatile(%)
≤5.0
Purity(%)
≥93.5
Ash content(%)
≤0.5
PH
5~7

###

Appearance White Paste
Viscosity (20 °C) 10000-13000 mPa.s
Solids Content approximately 40%
Shear Strength ≥10 mpa
Specific Gravity 0.95-1kg/L
PH 6-7
Shelf Life 12 months

How to Use Wallpaper Glue

Using wallpaper glue is a great way to permanently fix your wall to a wallpaper that you want to hang. Usually, this paste is made of methylcellulose or modified starch and clay. When you use it, you must follow the guidelines that are in the package to ensure that it works as you need it to.
wallpaper_glue

Remove it from the wall

Whether you are trying to remove wallpaper glue from a drywall surface, or you have some dated wallpaper that you need to replace, you need to know the right tools and techniques. Using a heat gun can help soften the adhesive and make it easier to scrape off. You can also use a paint scraper to chip away the dried adhesive.

You can also use hot water, baking soda, and dish soap to remove the adhesive. You can apply the solution with a sponge or a spray bottle. Just be sure to keep the wall damp.

Another way to remove the glue from a drywall surface is to use a steamer. You can get a commercial wallpaper steamer or you can use one of your own. You can also use a putty knife to get rid of the adhesive.

In addition to a hot water, baking soda, and dish soap solution, you can also use a trisodium phosphate solution. This is a soluble powder that breaks down the glue and removes stubborn stains. You can also use a rag to clean up the residue.

Using a sanding sponge can help you remove the remnants of the wallpaper. You can even use a plastic paint scraper to chip away the dried adhesive.

If you have a sanding sponge, you can also use a fine grit sandpaper to get a smooth finish. You can buy these at your local hardware store. When it is time to re-past the paper, you will need to use a scoring tool. This tool makes shallow cuts in the wallpaper, allowing the adhesive removal solution to reactivate.

To make a simple homemade solution, you can mix liquid dish soap with a few tablespoons of hot water. You can also add a few drops of fabric softener to the mixture. You can apply the solution to the wall in sections and allow it to sit for a few minutes. You can then wipe the solution off the wall.

You can also buy a spray bottle solution from a commercial wallpaper stripper. It is a little bit expensive, but you can find this solution at almost any hardware store.
wallpaper_glue

Clean the residue

Whether you are painting over wallpaper or repapering your walls, you will need to clean the residue of wallpaper glue from the surface. While you may be tempted to skip this step, it is important to remove the glue before you paint. Failure to do so can cause uneven paint or peeling wallpaper.

You can use a putty knife to scrape the adhesive off the wall. This method is great for removing small amounts of adhesive. It is also a good idea to wear gloves. This will protect your hands from hot water. You can also use a plastic paint scraper to chip away dried adhesive close to the wall surface.

For a more thorough cleaning, you can use a sponge and soak it in a solution. The sponge will help you to soften the glue and make it easier to scrape off. Once the glue is soft, rub the sponge gently over the wall. Alternatively, you can mix a small amount of liquid dishwashing soap with a cup of hot water and pour it into a spray bottle. You can also mix baking soda with hot water and pour this over the glue.

Regardless of which method you choose, make sure that you thoroughly test the solution on a hidden area. You will also need to wear rubber gloves, a mask, and wash your hands often. If you have children, be sure to keep them out of the room. You should also check the glue’s softness periodically by rubbing your fingernail over the wall.

Once the glue is softened, you can use a clothing steamer or fabric softener to get rid of the rest of the residue. If you have a hard adhesive, you can mix a small amount of baking soda with hot water and apply it with a sponge.

To finish, you can wipe the wall with a damp microfiber cloth. Using a clean sponge, you can then scrape the leftover residue with a wallpaper scraper. You can then rinse the wall with warm water.

You should also use extreme caution around electrical outlets. If you are unsure about how to remove the glue, you can always hire a professional to do it for you.

Avoid contact with the adhesive

Using a wallpaper glue is a great way to spruce up your walls without breaking the bank. It’s not only good for hanging borders on any wall covering, it’s also perfect for fixing loose edges on plastic, vinyl, and glass. It can also be used on textured surfaces like wood or tile. It’s a good idea to wear gloves when working with the stuff. This is especially true if you’re dealing with a heavy wall covering, as these can have a negative effect on the finish of your wall.

The best way to go about it is to pick up a high-quality adhesive from the shelf. This is especially true if you’re hanging heavy wallpaper, which requires a special glue. You may need to do some sanding beforehand to get a smooth surface. This will make the process a lot easier. Alternatively, you can use a simple spray solution. It’s a good idea to have a few containers on hand, as you’re likely to have to replace some of the old stuff as soon as you get the hang of it.

You could also try to do it yourself, but this is a bad idea, particularly if you’re dealing with delicate wallpaper. If you’re not up for the challenge, then hiring a professional is probably your only option. The benefits of using a professional are many, including the best quality materials and a guarantee that you won’t damage the wall. The downside is that you’ll end up paying more than you should.
wallpaper_glue

Put too much paste on the wall

Putting too much wallpaper glue on the wall can lead to problems. If the paste is too thick or too thin, it can cause blisters when the wallpaper dries. In addition, if you don’t soak the wallpaper for the recommended soaking time, it will continue to expand on the wall, causing bubbles.

If you want to remove wallpaper paste, you will need a sponge, a spray bottle, and some warm water. Depending on the type of wallpaper, the soaking time may vary. You can find this information on the label of the wallpaper.

To check for the presence of wallpaper glue, dampen a small piece of the wall. Then, run your finger along the wall. If your finger runs along a section of the wallpaper, it means that the adhesive is present. If there is a stain, dab it with a clean cloth or paper towel. If the stain is fresh, it should be easy to remove. However, if it has been dried, it will require more work.

When applying paste, make sure you follow the instructions on the adhesive. The paste is usually applied by spreading it over the wall. The paste is then left to set for several minutes. If you’re unsure how to apply the paste, you can purchase a specialty wallpapering tool.

When removing the paste, be careful not to damage the delicate wallpaper. If you have a spray bottle, use it instead of a sponge. If you don’t have a spray bottle, you can use a dry rag. A putty knife will also work.

You can also purchase a gel stripper. This will help you to remove stubborn paste without breaking the bank. You will need to leave it on the wall for fifteen to twenty minutes. After that, you can wipe the paste off with a dry cloth. If there is any remaining residue, you can re-moisturize the paste with pure lukewarm water.

Then, you can finish by smoothing the wallpaper over the adhesive. If you’re having trouble, try re-wetting the wall with warm water and using a softener.
China Home Decoration PVA Wallpaper Glue Powder Low Price and Good Quality     wallpaper edge glueChina Home Decoration PVA Wallpaper Glue Powder Low Price and Good Quality     wallpaper edge glue
editor by czh 2022-12-12